Help & Advice

Tetrion Technology Leads the Way

If you are a DIY enthusiast or Trade decorator, you will always find something you want to improve. However, it is important that you take those all-important steps before carrying out your DIY project! Our professionals have put together some ‘Good to Know’ pointers that many have found useful.

Before starting any DIY job                  Map it out!

When you first approach a job, it is important to PLAN. As the saying goes, failing to plan is planning to fail! Knowing how you’re going to tackle your DIY project will save you time, money and stress and most importantly carry out a successful DIY! 

THE PLAN

Tetrion Technology Leads the Way
Tetrion Good to Know

List

Get together a list of all the materials you will need order to carry out your job successfully.

Accessories & Tools

Make sure you have the correct tools to achieve a professional finish.

Tetrion Good to Know
Tetrion Good to Know

Navigate

Get the right products! – Navigate through our product catalogue to help decide which product is best suited for your repair. You can just ask Sir Fix-a-Lot! Alternatively, check out our ‘How to Videos’ for help and easy to follow step by step instructions.

Preparation

Surface preparation prior to any decoration can make the difference between an amateur DIY-job and a professional finish.

Tetrion Good to Know

Good to know pointers from the professionals at Tetrosyl

Tetrion Technology Leads the Way
Tetrion Good to Know

Prepping a hole before filling:

Cleaning the area:

  • Ensure the surface is dry, oil free, dirt free and clean. Any moisture may interfere with the adhesion of the filler to the substrate. Except for Hard as Rock Powder filler which will still adhere in a damp environment (but not wet).
  • Remove any large debris (leaves, stones, twigs and other loose items).

    Using Primer Bonder:
  • Filling a hole using a water-based filler such as All purpose, Easy On, Hard as Rock and Ready Mixed Tubes may require using Primer Bonder. Some holes may be exceptionally dusty and require Primer Bonder to stabilize and improve adhesion before the filler is applied. Check out the range for more information on Primer Bonder.

    • Tetrion Good to Know

    Prepping before overpainting:

  • Ensure any filled areas are fully dried through before overpainting. Areas that feel touch dry may still hold some moisture which will affect the painted area if overcoated too soon.
  • If a filled area has been sanded down, ensure any dust or debris is fully removed from the surface before over painting for a super smooth finish.

    • Tetrion Good to Know

    Preparation before adhesive & sealant application:

  • Ensure the surface is dry, oil free, dirt free and clean. Any moisture may interfere with the adhesion.
  • If bonding two items, it is important to plan how you will clamp them together in the setting stage to ensure no movement takes place. Planning this before you start will result in a more professional finish.

    • Tetrion Good to Know

    Preparation before using 2-part Fillers:

  • When using 2-part fillers such as Powerfil, Professional Woodfil and Stonefil all areas must be fully prepared before mixing your filler. You have only a few minutes until the filler will set rock hard. Avoid this delay or your filler will not bond effectively to the substrate.
  • Ensure the surface is dry, oil free, dirt free and clean. Any moisture may interfere with the adhesion.

    Whilst setting:
  • Once the 2-part filler has gelled and is setting solid it will generate heat, possibly up to 80°C. Ensure the surface being applied to can withstand this temperature.

    • THE TETROSYL FAMILY

     

    COMPANY

    STAY UP TO DATE

    Call: 0161 764 5981 | Email: info@tetrion.co.uk

    © 2018 Tetrosyl Ltd. Reg No 537855